What does Lowrance Structure Scan do?

What does Lowrance Structure Scan do?

StructureScan® 3D imaging scans underwater terrain and fish-holding structure to create a high resolution, three dimensional view beneath the surface. Immediately see where fish and structure are located in relation to your boat, with a picture-like view you can easily pan, tilt, and rotate for the perfect perspective.

What is Lowrance Structure Scan box?

Lowrance StructureScan HD utilizes an LSS-2 black box coupled to a proprietary transducer to add side and down scanning capabilities to certain Lowrance MFDs. A single multifunction transducer provides both side and down scanning capability.

Should transducer be level with bottom of boat?

The transducer should be even with the bottom of the boat or slightly below the bottom. Leading edge (the edge closest to the transom of the boat). One click too high: the transducer is tilted out of the water and cannot maintain a sonar signal.

Are Lowrance transducers interchangeable?

Are all Lowrance transducers interchangeable? No, currently none of the Lowrance transducers are universally compatible with all Lowrance fish finders. However, most Lowrance transducers are compatible with multiple Lowrance units, and most Lowrance fish finders are compatible with multiple transducers.

What Lowrance transducer do I have?

The best way to identify your Lowrance transducer is by referring to the small tag located close to the connector end of the cable. If this tag is missing, check the box that you got it in, or look up the transducer model on the Lowrance website, to get the full details of its model name.

How far should my transducer be from motor?

The ideal mounting location on a boat powered by an outboard or an I/O engine is about 18-24 inches starboard of the engine’s lower unit. If the boat has inboard power, mount the transducer far enough to starboard to clear any propeller turbulence.

How far down do you mount the transducer?

What is the best transducer mounting height? The best transducer mounting height is at the bottom edge of the transom, with the lower surface of the transducer protruding about 1/32 to 1/16 inches below the bottom of the boat.

Can you mount Totalscan transducer to trolling motor?

Users can have both Side and Down Scan and 2D Sonar on their bow Sonar Unit.

How do I identify my transducer?

Simply look at the transducer cable, about an inch from the connector. A silver tag is attached to the cable with the transducer model printed on it.