What does FSS stand for fire?
What does FSS stand for fire?
FSS stands for Fire Safety System.
What are fixed fire fighting installation?
A fixed firefighting system is a fire suppression, control or extinguishing system for use as a fixed installation in a building to protect the whole or part of a building and/or the objects within.
What should be your first action if you discover a fire aboard ship?
Pull the fire alarm and call for help. Alert people in the area to begin evacuation. Assist those with disabilities. Close doors to confine the fire.
When putting out a fire with a fire extinguisher you should?
The acronym PASS is used to describe these four basic steps.
- Pull (Pin) Pull pin at the top of the extinguisher, breaking the seal.
- Aim. Approach the fire standing at a safe distance.
- Squeeze. Squeeze the handles together to discharge the extinguishing agent inside.
- Sweep.
Is FSS Code mandatory?
The Safety system on chapter II-2 of SOLAS is known as Fire Safety System Code (FSS code), which came into force on July 2002 after Marine Safety Committee (MSC) adopted it in 73 session and became mandatory by resolution MSC 99(73).
What is the purpose of FSS Code?
1 The purpose of this Code is to provide international standards of specific engineering specifications for fire safety systems required by chapter II-2 of the International Convention for the Safety of Life at Sea (SOLAS), 1974, as amended.
What is hydrant system?
FIRE HYDRANT SYSTEM (EXTERNAL AND INTERNAL) (AUTOMATIC WATER CUM FOAM BASE)EXTERNAL FIRE HYDRANT. Fire hydrant installation consists of a system of pip work connected directly to the water supply main to provide water to each and every hydrant outlet and is intended to provide water for the firemen to fight a fire.
What is DCP system?
Dry Chemical Powder fire extinguishing system (DCP system) breaks down the chemical reaction within the fire and suppresses the flames almost immediately. This Dry Chemical Powder System is now branded Survitec. KEY FEATURES. Effective, non-toxic alternative and is harmless to people and the environment.
What are the 4 steps in the event of a fire?
In the event of a fire, the following steps should be taken to ensure the safety of all building occupants:
- Activate the fire alarm.
- Call 911 immediately and provide information.
- Assist injured personnel or notify emergency responders of the medical emergency.
- Exit the building following emergency maps.
What are the 3 P’s of fire safety?
Follow the three P’s: prevent, plan and practice. Make sure your home has working smoke alarms, your family has a fire escape plan, and you have practiced it.
What is FSS in shipping?
The FSS Code or International Code for Fire Safety Systems is a set of international treaties organised by the International Maritime Organization under the SOLAS Convention that are designed to reduce the risk of fire, and aid in emergency response aboard ships.
What is the latest edition of FSS Code?
Media:Book. This publication presents engineering specifications for fire safety equipment and systems required by SOLAS chapter II-2 concerning: international shore connections.
What are the three types of hydrants?
Slide-gate, compression, and toggle mechanisms are the three types of dry barrel hydrants. The hydrant’s water valve is located far below ground in the hydrant’s base in dry barrel hydrants.
How many types of hydrants are there?
two kinds
Dry barrel and wet barrel are the two kinds of Fire Hydrants. The wet barrel fire hydrant holds a constant water supply, while the dry barrel fire hydrant needs to have a valve release to let water in.
Why nitrogen is used in DCP?
Nitrogen is used as propelling gas to release the powder from the tank.
Why DCP is used on gas fires?
Dry Chemical Powder fire extinguishing system (DCP system) breaks down the chemical reaction within the fire and suppresses the flames almost immediately.
What are the 3 A’s of fire fighting?
Activate, Assist and Attempt
6) To remember the rules of fighting fires, just remember the three A’s: Activate, Assist and Attempt. 7) The four simple steps for operating a fire extinguisher can be remembered with the word PASS. Pull, Activate, Squeeze, Sweep.