Mastering Dexter Electric Trailer Brake Adjustment: A Comprehensive Guide

Adjusting your Dexter electric trailer brakes correctly is paramount for safe and efficient towing. The key lies in ensuring the brake shoes make consistent and firm contact with the brake drum when the electric current is applied, providing optimal stopping power without dragging or overheating. This involves accessing the adjustment slot, using a brake adjustment tool to rotate the adjuster wheel, and ensuring the wheel spins freely after adjustment with a slight drag indicating proper brake shoe engagement.

Understanding the Importance of Properly Adjusted Trailer Brakes

Electric trailer brakes are a critical safety feature, especially when towing heavy loads. Properly adjusted brakes provide reliable stopping power, reducing the strain on your tow vehicle’s brakes and significantly shortening stopping distances. Neglecting brake adjustment can lead to several issues, including:

  • Increased stopping distance: Weak or uneven brakes compromise your ability to stop safely in emergency situations.
  • Uneven brake wear: One brake working harder than the others leads to premature wear and costly repairs.
  • Overheating: Dragging brakes generate excessive heat, damaging brake shoes, drums, and even potentially causing fires.
  • Reduced fuel efficiency: Dragging brakes increase rolling resistance, negatively impacting your fuel economy.
  • Loss of control: In severe cases, improperly adjusted brakes can contribute to trailer sway and loss of control.

Therefore, understanding and performing regular brake adjustments is a crucial part of trailer maintenance.

Step-by-Step Guide to Adjusting Dexter Electric Trailer Brakes

This guide provides a detailed, step-by-step process for adjusting Dexter electric trailer brakes. Always consult your trailer’s owner’s manual for specific recommendations and safety precautions.

1. Preparation and Safety

  • Safety First: Always disconnect the trailer from the tow vehicle and secure the trailer with wheel chocks on both sides to prevent movement. This is absolutely critical for your safety.
  • Gather Your Tools: You’ll need a brake adjustment tool (a specialized tool with a curved end designed to reach the adjuster wheel), a jack, jack stands, a lug wrench, and possibly a screwdriver or pliers for removing the rubber plug covering the adjustment slot.
  • Locate the Adjustment Slot: The adjustment slot is typically located on the backing plate of the brake assembly. It’s usually covered by a rubber plug to keep out dirt and debris.

2. Lifting the Trailer and Removing the Wheel

  • Lift the Trailer: Use the jack to safely lift the trailer wheel off the ground. Ensure the jack is placed on a solid, level surface.
  • Secure with Jack Stands: Immediately place jack stands under the trailer frame near the wheel to provide secure support. Never work under a trailer supported only by a jack.
  • Remove the Wheel: Use the lug wrench to loosen and remove the lug nuts, then carefully remove the wheel.

3. Accessing and Adjusting the Brake

  • Remove the Rubber Plug: Locate the rubber plug covering the adjustment slot on the backing plate and remove it. You may need to use a screwdriver or pliers to pry it out gently.
  • Insert the Brake Adjustment Tool: Insert the brake adjustment tool into the adjustment slot. You will feel the tool engage with the star wheel adjuster.
  • Adjusting the Brakes (Tightening): Rotate the star wheel adjuster to expand the brake shoes outward until they make contact with the brake drum. This is typically done by moving the adjustment tool upwards. You should hear clicking sounds as the adjuster turns.
  • Check for Drag: After making a few adjustments, try to spin the brake drum by hand. You should feel significant resistance, indicating that the brake shoes are making contact with the drum.
  • Adjusting the Brakes (Loosening): Now, slowly back off the adjuster until the wheel spins freely with a slight, consistent drag. This ensures the brake shoes are not constantly rubbing against the drum but are close enough to engage quickly when needed. Typically, this involves backing off the adjuster several clicks (e.g., 6-8 clicks).
  • Verify Free Rotation: Once you have achieved the proper adjustment, the wheel should spin freely with a slight drag. It should not be completely loose or bind tightly.

4. Reassembly and Testing

  • Replace the Rubber Plug: Reinstall the rubber plug to prevent dirt and debris from entering the brake assembly.
  • Reinstall the Wheel: Carefully reinstall the wheel and tighten the lug nuts in a star pattern to the manufacturer’s specified torque.
  • Remove Jack Stands and Lower Trailer: Remove the jack stands and slowly lower the trailer to the ground using the jack.
  • Torque Lug Nuts: Double-check the torque of the lug nuts after lowering the trailer.
  • Repeat for All Brakes: Repeat this process for all the remaining trailer brakes.
  • Test the Brakes: Before towing, perform a test run at low speed to ensure the brakes are functioning correctly. Listen for any unusual noises and feel for smooth, even braking. Use your trailer brake controller to manually apply the trailer brakes at low speeds.

Key Considerations and Common Mistakes

  • Read the Manual: Always consult your trailer’s owner’s manual for specific instructions and torque specifications.
  • Direction of Adjustment: Dexter brakes usually require upward movement of the adjustment tool to tighten the brakes, but always confirm the correct direction.
  • Don’t Overtighten: Overtightening the brakes can cause excessive heat, brake failure, and damage to the brake components.
  • Check for Worn Components: Inspect the brake shoes, drums, and springs for wear and damage. Replace any worn or damaged parts before adjusting the brakes.
  • Proper Lubrication: Ensure all moving parts are properly lubricated to prevent corrosion and ensure smooth operation.
  • Brake Controller Setting: Adjust your trailer brake controller sensitivity for optimal braking performance.

Frequently Asked Questions (FAQs)

Here are some frequently asked questions regarding Dexter electric trailer brake adjustment:

FAQ 1: How often should I adjust my Dexter electric trailer brakes?

It’s recommended to adjust your brakes every 3,000 miles or at least once a year, whichever comes first. More frequent adjustments may be necessary if you tow frequently or in harsh conditions.

FAQ 2: What are the signs that my trailer brakes need adjustment?

Common signs include increased stopping distance, uneven braking, squealing noises, and dragging brakes. A spongy brake pedal on your tow vehicle can also indicate a problem with the trailer brakes.

FAQ 3: Can I adjust my trailer brakes without removing the wheel?

While some individuals may attempt to adjust the brakes through the adjustment slot with the wheel on, it is highly recommended to remove the wheel for better access and visibility. This allows for a more thorough inspection and accurate adjustment.

FAQ 4: What is the correct way to insert the brake adjustment tool?

The brake adjustment tool should be inserted into the adjustment slot so that the curved end engages with the star wheel adjuster.

FAQ 5: What happens if I overtighten my trailer brakes?

Overtightening can cause the brakes to drag, overheat, and wear out prematurely. It can also lead to decreased fuel efficiency and potential brake failure.

FAQ 6: What does “backing off” the adjuster mean?

“Backing off” the adjuster means loosening the brake shoes slightly after they have been tightened against the brake drum. This creates the slight drag necessary for proper brake function without causing excessive wear.

FAQ 7: What kind of lubricant should I use on my trailer brake components?

Use a high-temperature brake lubricant specifically designed for brake components. Avoid using general-purpose grease, as it can melt and contaminate the brake shoes.

FAQ 8: Can I use a screwdriver instead of a brake adjustment tool?

While a screwdriver might work in a pinch, it is strongly discouraged. A brake adjustment tool is specifically designed for this purpose and provides better control and leverage, preventing damage to the star wheel adjuster.

FAQ 9: How do I know if my brake shoes are worn out?

Inspect the brake shoes for excessive wear, cracks, or contamination. If the friction material is thin (less than 1/8 inch), it’s time to replace them.

FAQ 10: My trailer brakes are locking up. What could be the problem?

Possible causes include overadjusted brakes, a faulty brake controller, or a short circuit in the wiring. Check each component to isolate the issue.

FAQ 11: What is the difference between electric brakes and hydraulic brakes?

Electric brakes are activated by an electric current from the tow vehicle’s brake controller, while hydraulic brakes use hydraulic pressure from the tow vehicle’s master cylinder. Electric brakes are more common on larger trailers.

FAQ 12: Where can I find a Dexter brake adjustment tool?

Dexter brake adjustment tools are widely available at automotive parts stores, trailer supply stores, and online retailers.

By following this guide and addressing common concerns, you can confidently adjust your Dexter electric trailer brakes and ensure safe and reliable towing. Remember, regular maintenance and proper brake adjustment are critical for your safety and the longevity of your trailer.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top