How much does a Minn Kota Vantage weight?
How much does a Minn Kota Vantage weight?
80 lbs.
80 lbs. Vantage’s mounting system breaks away on impact. It’s easy to reset, and protects your motor and boat transom from unseen hazards. Power Trim/Stow and Deploy: When depth and fishing conditions change, all you have to do is push a button to raise or lower your motor.
Why does my trolling motor have 4 wires?
Attach one set of red and black wires to one battery’s positive and negative poles and the other set to the other battery or battery setup. Trolling motors with four wires usually have switches that allow you to choose which battery setup to use.
Can I hook my trolling motor directly to a battery?
Items you will need Connect the 12-volt trolling motors to a single 12-volt battery by simply fastening the black negative lead from the motor to the negative battery terminal, and the red positive lead from the trolling motor to the positive battery terminal.
Can I wire trolling motor straight to battery?
The circuit breaker should be linked directly to your trolling motor, connecting the positive (red) lead from the motor to the positive terminal on the circuit breaker. The circuit breaker should then be connected to your first battery from its negative terminal to the positive terminal on the battery.
How many lbs of thrust do I need for my boat?
Thrust – Boat Weight and Hull Design A beginning rule of thumb is that you want a minimum of 2 lbs of thrust for every 100lbs. For example, if you have a 3000lb boat, fully loaded, then the calculation is (3000/100) * 2 = 60lbs of thrust.
What size battery do I need for a 55 lb thrust trolling motor?
Using a Newport Vessels 55lb thrust motor continuously for two hours at full speed would require a battery with a 100-120 AH rating.
How far should a trolling motor be in the water?
A trolling motor’s ideal propeller should be at a depth that keeps about 6 inches of water above the blades. In other words, the centerline of the motor and the prop shaft should be about 12-18 inches below the waterline, depending on the make, model and dimensions of the trolling motor.
Do I need a circuit breaker on my trolling motor?
It is highly recommended that a circuit breaker or fuse be used when installing a trolling motor.
Why do you need a circuit breaker for a trolling motor?
A circuit breaker protects the electrical system of your trolling motor, as well as your battery, from damage due to electrical current overload or short circuits. Circuit breakers “trip” (cut power) above a specific amperage, so the motor and battery will not suffer damage from electrical overload.
How deep should my trolling motor be in the water?
about 12-18 inches
A trolling motor’s ideal propeller should be at a depth that keeps about 6 inches of water above the blades. In other words, the centerline of the motor and the prop shaft should be about 12-18 inches below the waterline, depending on the make, model and dimensions of the trolling motor.