How long does Bando belt last?

How long does Bando belt last?

Durability/Range The average lifespan for the belt is 60,000 miles, but you can find some units from high-end brands that push to 100,000 miles.

Where are Bando belts manufactured?

Bowling Green, KY
BELT PRODUCTS FOR AUTOMOBILES Bando has proudly manufactured accessory drive belts in Bowling Green, KY since 1988.

How do you read a serpentine belt size?

The first digit indicates an eight-rib belt, followed by “P” to identify metric belt sizing, and a “K” showing that this belt conforms to the SAE standard for rib sizing (3.56 millimeters wide for automotive-type serpentine belts). The final series of numbers is the effective length of the belt, given in millimeters.

How do I read my Dayco belt number?

On the scale underneath the moveable pulley, the outer lines on the blue plastic will indicate the length of the belt in millimetres and inches. In this example the number 2045, which indicates a belt length of 2045 millimetres.

How do you read a Bando belt?

Automotive belts start with either 4L (12.5mm wide) or 3L (9.5mm). The number following it is the outside length of the belt in tenths of inches. The inside length of the belt is typically 2″ less for a 4L belt, and 1-1/2″ less for a 3L belt. An example would be 4L460, which would be 46″ long outside, 44″ inside.

Is Bando Honda OEM?

Bando is the OEM suppliers to over 80 percentage of the top 10 cars sold in the U.S. (by volume). As an OEM belt manufacturer, the serpentine belts are precision ground two times to insure adherence to OEM specification.

What size fan belt do I need?

Use a cloth measuring tape (not a steel one) and wrap it around the outside of the belt. You also use a thin string to take this measurement and place it on a steel tape to get the correct length. Next, for “A” Belts (1/2” width) subtract two-inches from the outside measurement to select the correct V-belt.

How do you find the belt number?

What do fan belt numbers mean?

The first one, and the more recognizable one, is the manufacturer’s part number, which is referenced when ordering the part. The second, and lesser known one, is a global industry standard number that indicates the size of the belt.

What belts are on a Honda?

Honda vehicles are equipped with a serpentine belt, also known as a drive belt. Serpentine belts have replaced other types of belts because a single belt is more compact, less expensive to replace and simpler to install compared to multiple belts.

Who makes Honda belt tensioners?

Bando –
Manufactured by Bando – one of the world’s largest original equipment tensioner suppliers to insure proper form, fit, and performance.

How long is a size 38 belt?

Belt Size Conversion Chart

US Belt Size (inches) European Belt Size (centimeters)
34″ 86 cm
36″ 91 cm
38″ 97 cm
40″ 102 cm

When should I replace my car fan belt?

Today, most serpentine belts are expected to last anywhere from 60,000 to 100,000 miles. Some belts can last significantly longer than this, while others give out before 60,000 miles. Make sure to check your owner’s manual to find out the recommended belt replacement time frame.

What size is 38mm belt?