How does Nitro 2 speed work?
How does Nitro 2 speed work?
the one way bearing is mounted on so that the rotation of the motor locks the bearing so the first gear can drive the transmission. Once a certain rpm is reached, the springs holding the clutch shoes expand enough that they grip the clutch bell, and the second gear now will start to drive the transmission.
How does a 2 speed transmission work?
To shift gears in this transmission, you move a clutch plate sideways so that it locks together with one or the other of the two gears on the output shaft. The gears can spin freely on the output shaft: they do not transmit any power directly.
What does 2 speed gearbox mean?
The transmission has two forward gears and one reverse gear, a neutral position, and the possibility of semi-automatic gear shifting. The neutral allows to safely tow the vehicle in the event of an electric motor failure, which was a specific requirement of the customer.
How does a nitro RC clutch work?
When the engine is sitting at idle, the clutch shoes, which are held together with a clutch spring, contract around the crankshaft and do not touch the clutch bell. As the engine rotates faster the centrifugal force overcomes the spring and causes the clutch shoes to expand, which engages the clutch bell.
What does 2 speed automatic mean?
The transmission has two forward gears and one reverse gear, a neutral position, and the possibility of semi-automatic gear shifting.
What is a 2 speed Powerglide?
The Powerglide is a two-speed automatic transmission designed by General Motors. It was available primarily on Chevrolet from January 1950 through 1973, although some Pontiac models also used this automatic transmission after the fire at the Hydra-Matic factory in 1953.
What is a 2 speed CVT?
CVT stands for continuously variable transmission, and this type of automatic transmission uses pulleys and a steel band instead of traditional fixed gears. It’s always automatically adjusting to your driving, and it provides smooth, stepless gear changes.
Are Powerglide transmissions any good?
Powerglide was the first automatic transmission available on a low-priced car. As well as the last of its kind almost a quarter century later. Yes, the Powerglide’s longevity was legendary, both in terms of its three decades of utilization, as well as its durability.
What does a slipper clutch do on a RC car?
The slipper clutch has several useful purposes. It helps reduce wheel spin as your vehicle accelerates, something very useful on low traction surfaces. This is helpful as your vehicle will be less likely to spin-out as it speeds up exiting a corner or any time you punch the throttle quickly.
Do all RC cars have a slipper clutch?
Slipper clutches are not found on all RC cars. In fact almost all RC on road cars will not have one. Common types of RC cars to find these on include Rock Crawlers, Off road buggies, monster trucks and a few more.
What are the 1 and 2 gears for?
By setting L (or 1 or 2), the gear will stay low and you will be able to use engine brake, instead of using brakes all the way down the hill and suffering from fading. The transmission will not necessarily pick a lower gear when going downhill, although they will pick a low gear if you are going uphill.
When should I use D2 gear?
“2 (D2)” (Second Gear): Use this position for hill climbing, engine braking on downhill grades, or starting on slippery roads. (Caution: Do not downshift into the “2 (D2)” position other than the speed mentioned in the owners manual.
Are Powerglide transmissions good?
“Both the TH400 and Powerglide are extremely durable transmissions, but the ‘Glide is a better choice for lightweight, small-tire cars.
How much HP will a Powerglide handle?
With all the available upgrades, both the Powerglide and the TH400 are capable of withstanding an incredible 3,500 horsepower.
Why are CVT transmissions bad?
CVTs can be expensive to repair or replace when compared to a conventional automatic transmission. Some of the common problems that owners run into include overheating, slipping, and sudden loss of acceleration. Shuddering is also a common problem.
How fast can a 2 speed Powerglide go?
260 mph
Currently Robert Campisi from Australia holds the World Record for the fastest run using a Powerglide transmission, clocking 5.95s at 260 mph in his Twin Turbo Ford Mustang in September 2011.
What happens if slipper clutch is too tight?
Setting Your Slipper Clutch Too much slip and you can overheat the slipper; too tight and you can do damage to the spur gear (or the gears inside the transmission).