How do you turn off the airbag light on a BMW?

How do you turn off the airbag light on a BMW?

Answer provided by

  1. Turn on your car and make sure that the airbag light is on.
  2. Wait for seven seconds, then turn your car back off.
  3. Repeat this process two more times. Your airbag light should turn off.

Why is the airbag light on BMW?

What does it mean: The airbag system, or supplemental restraint system (SRS) light illuminates when a problem is detected by your BMW’s computers within the airbag control unit. An illuminated SRS warning light means that the system has been disabled and the airbags will not deploy in the event of impact.

What causes an air bag light to come on?

When this light is on, that means your airbags are deactivated. It means they will not deploy properly if you get into an accident. If your car’s battery has drained recently, it may have also depleted the backup battery that powers the airbags.

How do I get my airbag light to go off?

Conclusion – How to Reset Airbag Light

  1. Turn your ignition on and off.
  2. Restart your vehicle and do a test drive.
  3. Examine the passenger airbag switch.
  4. Inspect whether seat belts are fastened or working correctly.
  5. Verify that the passenger seat sensor is not applied.
  6. Use a scanner with an SRS or airbag light reset option.

How do I get my airbag light to turn off?

Can a blown fuse cause the airbag light to come on?

There are many possible fuses that could be behind this, but fuse #13 is a likely culprit. If your airbag light is on and your rear windshield wiper doesn’t work, then it’s a pretty good indication that you need to change fuse #13 and possibly others. Blown fuses can definitely cause the airbag light to come on.

Can airbag light reset itself?

Step 3: Repair the fault Remember always to remove the battery connection when working with airbags. The airbag light will often go away by itself after repairing the problem, but not in all car models.

Can I reset airbag light without tool?

It is impossible in most car models to reset the airbag light without a scanner. This is for safety cautions because you should always repair the fault after the airbag light occurred. Luckily, in many car models, the airbag light will also go away by itself if you have repaired the problem.

Will disconnecting battery reset airbag light?

(Note that removing the car battery terminals by itself will not reset the airbag light).

What does it mean when your airbag light won’t go off?

The airbag light indicates that something is wrong with the seatbelts or airbags. This means that it’s probably not safe to drive with the airbag light on. If it stays illuminated in your vehicle, we recommend having it towed to the dealership rather than driving it yourself.

How do I get the airbag light off my dashboard?

How do I clear the air bag warning light?

Can I drive with airbag warning light on?

When the airbag light illuminates, it means that there is a problem with the system. Most likely, the airbag will not deploy in an accident because of this fault. Therefore, it is not recommended that you drive the vehicle until you have the system repaired. You should never ignore the vital warning.

Can you drive with airbag light on?

The bottom line is that, when your airbag light comes on, it’s vital that you don’t drive any further and have your car checked by a mechanic as soon as possible. Until the problem is diagnosed and fixed, your airbags will not deploy.