How do you reset the maintenance light on a Toyota Solara?

How do you reset the maintenance light on a Toyota Solara?

Use the trip button on the left-hand side of the instrument cluster to select your odometer. Turn the car off. Press the trip button in and turn the key to the on position. The odometer should flash and the maintenance required light will turn off.

What does the maintenance light mean on a 2007 Toyota Solara?

The maintenance required light is notifying you that maintenance is required according to the driven distance on the vehicle’s maintenance schedule. Read More: Tips and Tricks. The light illuminates for about 3 seconds and then flashes for about 15 second every 4,500 miles after the maintenance has been reset.

How do I reset the check engine light on a 2006 Toyota Solara?

Turn key to on position, leave key in the on. Position for two minutes while cable is off. Turn key off after two minutes. Then reconnect negative cable.

How do you turn off the Trac Off light on a Toyota Solara?

To turn TRAC off, simply push and release the VSC OFF button. The “TRAC OFF” indicator light should come on. Push the button again to turn TRAC back on. Push and hold the button for three seconds to turn off both TRAC and VSC.

What causes the maintenance required light to come on?

Answer provided by. The flashing maintenance required light is simply notifying you that your vehicle is due for maintenance. The light will illuminate after a certain amount of time has passed since your car last had maintenance or in accordance with how far the car has been driven.

How do you reset the maintenance required light on a 2007 Toyota Camry Hybrid?

Quickly, push and hold the odometer button your dashboard, then turn your key to position two. Continue to hold the odometer button for 10 seconds. If done correctly, the maintenance light should flash and you may hear a beeping. That should turn off the maintenance light on your Toyota Camry.

What does TRAC OFF mean Toyota Solara?

Indicates that Traction Control is off. The TRAC system switches the traction control on/off to prevent wheelspin and further downshifting. To turn the TRAC system off, quickly press and release the button. The TRAC OFF indicator should come on.

How do I clear my traction control light?

Traction Control Is Turned Off So, if your vehicle’s traction control light is on, it may be as simple as making sure your traction control is not turned off. Commonly located near the steering wheel on the instrument plane, you will be able to turn it back on via a simple switch.

How do I reset my Toyota maintenance message?

How to Reset a Toyota Maintenance Light

  1. Put your key in the ignition and turn it to position one, the position just before starting the car.
  2. Push and hold the trip meter reset button on the dashboard, then turn your key to position two.
  3. Continue holding the odometer button for 10 seconds.

What’s the difference between check engine light and maintenance required?

The simplest explanation for the difference between a check engine light and service light is the former indicates a major problem and the latter indicates a need for maintenance or regularly scheduled service.

Why does my Toyota says maintenance required?

The Toyota maintenance light can appear on your dashboard as “MAINT REQD”. It’s a light that remains active permanently, letting you know that you need to go for an oil change in a certified auto shop. Changing the oil in your Toyota can improve fuel efficiency and make your vehicle run as smooth as silk.