How do I reset my Canon printer back to factory settings?

How do I reset my Canon printer back to factory settings?

1 Factory Reset

  1. Press Setup.
  2. Press the arrow buttons until you navigate to Device settings and then press OK.
  3. Press the arrow buttons until you navigate to Reset setting and then press OK.
  4. Press the arrow buttons until you navigate to Reset all and then press OK.
  5. Select Yes.
  6. Press OK. Your device is now reset.

How do I put my Canon into service mode?

Certain functions are not possible via the on-screen menus unless you know the secret ‘service menu’ combination.

  1. Press and release the “User Mode” or ” * ” (asterisk) key on your Canon’s keypad.
  2. Press and hold the “2” and “8” keys simultaneously.
  3. Press and release “User Mode” to enter the service mode.

How do I reset my Canon photocopier?


  1. Move to the printer, then press on the control panel. The RESET menu is displayed.
  2. Select SOFT RESET using and .
  3. Hold down until HARD RESET is displayed, then release the button.

How do I reset my Canon ink cartridge without chip resetter?

How to Reset Canon Pixma Ink Cartridge. In many cases, you can press and hold the “ok” or “resume” button on the front of the printer for about 10 seconds. This prompts resetting Canon ink cartridge and should allow you to continue printing.

What is the default admin password for Canon printers?

The password is either “canon” or the printer serial number if it is specified. You will need to print the nozzle check pattern for the PRO-10 or the PRO-100 to see the firmware version. At the time of purchase, the user name “ADMIN” is also specified for the models above.

How do I go into service mode?

Tap the dialing field near the top of the screen to display the numeric pad, and then type in the code for your phone model and carrier. Tap the “Dial” button to access Service mode.

How do I bypass Canon printer ink error?

Canon printer ink error message indicating that your ink is low or empty. You can bypass these error messages by holding down your printer’s RESUME, STOP/RESET, or COLOR START button for 5 to 15 sec. The ink monitor will shut off, the printer will stop blinking, and the printer itself will resume printing.

How do I log into my canon printer as administrator?

Logging In to the Machine Using the Touch Panel Display To log in to the machine as an administrator using the touch panel display, press (Settings/Registration) on the control panel. Press (Settings/Registration). Press [Log In].

What does service mode do?

Entering this special mode involves typing a special code into the phone app of your Android phone. You will then be able to access diagnosis tools like RGB Test, Vibration testing, and Speaker testing, among others. You can access service mode through a simple procedure that can take only a few seconds to do.

How do I use advanced service mode?


  1. Open the dial pad and enter *#0011#
  2. A window will pop up saying you’ve entered ‘Service Mode’
  3. Click on Key Input (on the right hand corner of the screen)
  4. Enter the ‘Qo’ key.