Are keg tap handles universal?

Are keg tap handles universal?

However, all faucet handles and faucets produced in the U.S., even if made by different manufacturers, are interchangeable as they have the U.S. beer industry standard 3/8″-16 UNC threads.

Are all beer tap handles the same size?

Standard tap handles typically measure between 9-13” tall and no more than 3” wide and/or deep. Short tap handles, also known as shotgun tap handles, range between 4-6” tall and no more than 3” wide. Always keep the width at 3” or under.

How do you change a keg tap handle?

Simply screw the beer tap handle onto the beer faucet lever turning clockwise until it is hand tight only. On the beer faucet lever there is an adjusting knob that allows you to align the beer tap handle to your desired location.

What is a beer handle called?

A beer tap is a valve, specifically a tap, for controlling the release of beer. While other kinds of tap may be called faucet, valve or spigot, the use of tap for beer is almost universal.

Are beer taps interchangeable?

The standard beer faucet is designed for easy installation and can be swapped out with ease. This includes the draft tower of your kegerator, as well as a shank for through-the-wall or door-dispensing units, such as a converted kegerator.

What is the tap handle called?

Faucet handles or levers.

What is a tap handle called?

Do all taps fit all kegs?

Many people dont know that there are different beer tap couplers for the different styles of beers for. This is because not all kegs are the same, and are brewed and come from different parts of the world.

What are the different types of beer taps?

Draft Beer Faucet Materials Draft faucets are typically available in three types of finishes: chrome-plated, stainless steel and polished brass. While all three have different aesthetic qualities, there are some additional things to keep in mind when selecting the style you want to use.

Why do my tap handles get stuck?

This happens when residual beer inside the faucet is allowed to dry and gunks up your tap system. To prevent the handle from sticking, upgrade to a forward-facing faucet that allows the beer to drain completely.

What size are the threads on a beer faucet?

3/8″-16 UNC
Thanks to a miracle of modern standardization, virtually all beer faucets feature either a 3/8″-16 UNC (United States) or M10×1.5mm (everywhere else) external threaded post for mounting a faucet, which means that the only things you need for making your own handle are: Something you can drill a hole into.

How do I know what keg coupler I need?

To choose the correct coupler for your home use, you must know the brand/style of beer you serve, know where it was brewed and/or the size of keg it is in. This is because there are six different types of keg couplers.

How do I identify a tap?

All standard ground thread taps are marked with the letter “G” to designate Ground Thread. The letter G will be followed by the letter “H” to designate above basic; or the letter “L” to designate below basic. The number following H or L signifies the number of .