Where can I find a well log in Oregon?
Where can I find a well log in Oregon?
The Water Resources Department (WRD) has drilling records of most water wells drilled in Oregon since 1955. If there is a copy of your well log, you can find it using the WRD’s search program called GRID. You may also contact your local Watermaster for a copy of well logs and for help interpreting the information.
What is a well Completion Report?
Water well completion reports or “well logs” include information about well including the construction, location, yield, geology, and depth. This vital water supply information is often not in the possession of the water supply owner unless they had the original well drilled.
What is a Watermaster in Oregon?
The Watermaster functions as a local contact for landowners, elected officials and watershed councils, as well as other government agencies at the local, state, and federal level.
How deep is the average well in Oregon?
In the Medford area of Jackson County, springs discharge as much as 18,000 gallons per minute. Wells that are used for domestic and commercial and agricultural (primarily livestock watering) purposes generally are 40 to 145 feet deep. Depth to water ranges from less than 10 to about 15 feet below land surface.
Do you need a permit for a well in Oregon?
The Water Resources Commission requires a permit, permit fee, and bond or irrevocable letter of credit, for each water supply well constructed, altered, converted, or abandoned by a landowner, unless the landowner is a licensed and bonded Water Supply Well Constructor.
What are water rights in Oregon?
Under Oregon law, all water belongs to the public. With some exceptions, cities, irrigators, businesses, and other water users must obtain a permit or license from the Water Resources Department to use water from any source – whether it is underground, or from lakes or streams.
How do I get information on my well?
Measure It
- You can get the information from your well report.
- You can get the information from the company who drilled the well.
- You can get a copy of the well report from your state. Check below for information on each state.
How do I find the water table in my area?
The most reliable method of obtaining the depth to the water table at any given time is to measure the water level in a shallow well with a tape. If no wells are available, surface geophysical methods can sometimes be used, depending on surface accessibility for placing electric or acoustic probes.
What is a Watermaster?
Definition of watermaster : one in charge of the distribution of irrigation water from a main canal.
How much does it cost to drill a well in Oregon?
Expect such work to be in the range of $1,000 to $5,000. Get bids from several drillers. No permit is required. The well driller files all the necessary paperwork with the Oregon Water Resources Department.
Do you need a permit to drill a well in Oregon?
Under Oregon law, “all water within the state from all sources of water supply belongs to the public.” In general you must obtain a water right permit before using water from any well.
Can I drill my own well in Oregon?
What is the average gallons per minute for a well?
5 gpm (two fixtures running simultaneously at 2.5 gpm) is a good estimate of peak demand, for the typical household. Water wells that reliably yield 5 gpm should be able to meet peak and daily needs for most residences. Wells yielding less than 5 gpm, however, are sometimes the only water source available.
Can you own creeks on your property in Oregon?
A big reason: for many rivers and creeks, there are no state laws. Twelve of the largest rivers, including the Willamette and Columbia, are deemed “navigable” — making them state-owned and generally open to the public. Streams that are “tidally influenced” or on public land are also generally open.
Can I dig a pond on my property in Oregon?
Under Oregon Law, all water belongs to the public. With few exceptions, any person wishing to take and use surface water or groundwater must first obtain a permit from the Water Resources Department. The water right, once developed, is a type of property right and is attached to the land where it was established.
How do you find out how deep your water well is?
How to Measure
- Lower until you feel slack. Note, you may feel some bouncing as you pass the pump depending on the space from the casing to the weight on the measuring line.
- Mark the line at the top edge of the casing.
- Pull out and measure. This is your well depth – the distance to the bottom of the well shaft.
How do you know if you have a high water table?
A telltale sign of a high water table is if your neighbors experience similar flooding issues or if your home is near a water source such as a lake, river, or marsh.
What is a Watermaster California?
The Watermaster Program ensures that water is allocated according to established water rights as determined by court adjudications or agreements by an unbiased, qualified person, thereby reducing water rights court litigation, civil lawsuits, and law enforcement workload.