What is aspect ratio chainmail?

What is aspect ratio chainmail?

The aspect ratio of a chainmaille weave is generally considered to be a range of values describing the range of jump rings with which it is possible to make that particular weave. For example, European 4 in 1 will generally work when made with rings that have an aspect ratio between 3 and 5.

How big should chainmail rings be?

More about what aspect ratio is and how chainmaillers use it in the other answers in this section. If you’re a beginner, we suggest starting off with rings that have an inner diameter of at least size H (3/16″, 4.8mm). Any smaller, and you may become frustrated, unless you’re used to working with tiny things!

What does AR mean in chainmail?

Aspect Ratio (AR) One of the terms dealing with chainmail that you will run across a lot is Aspect Ratio. It may seem intimidating, but it really isn’t that complicated. All it entails is dividing the Inner Diameter by the Wire Diameter. Like this: Aspect Ratio = Inner Diameter / Wire Diameter.

How many rings do I need for chainmail?

Depending on what you choose, your chainmail shirt could take anywhere from 5,000 rings to 40,000 (or even more) rings to make.

What is the best type of chainmail?

Riveted chainmail tends to be stronger and more resistant to combat than butted rings. For contact reenactments, riveted chainmail is better suited than butted chainmail.

How do you make a European 4-in-1 chainmail?

How to Create a European 4-in-1 Chainmaille Pattern

  1. Open one jump ring then thread on four closed jump rings.
  2. Add two new closed jump rings to the open jump ring then close the jump ring.
  3. Turn the woven chainmaille 180 degrees.

How is a Byzantine chain made?

How to make byzantine chain in 6 steps

  • Step 1: Start with two jump rings. Take your first jump ring.
  • Step 2: Add your two closed jump rings to another.
  • Step 3: Add a new jump ring to your two jump rings.
  • Step 4: Add two more jump rings to the two you’ve just added.
  • Step 5: Now for the fiddly part!
  • Step 6: Rinse and repeat.

How much wire do I need for chainmail?

A shirt of chainmail will require about 1/2 mile (0.8km) of wire. You can buy large spools of wire at any store that sells fencing supplies. If you are making jewelry, you will want to get thinner wire that has a non-reactive coating. You can find appropriate wire in a variety of color at most craft stores.

Was chainmail heavy?

There were many benefits to wearing chainmail for protection: it was flexible, easy to fix, easy to make, and surprisingly effective in protecting against cuts and slashes. Although it was very heavy (55 to 60 pounds) and difficult to wear, chainmail remained popular until around the 15th century.

Is making chainmail hard?

Making chainmail isn’t hard, but it does take some initial preparation. This include buying materials and tools, as well as learning some weaves.

How do you make half Persian 4 in 1?

Half Persian 4-in-1 on Wire Place four closed jump rings on the wire. Pass an open jump ring through the eye created by the two left jump rings on the wire. Bring the open jump ring back up through the eye created by the two right jump rings on the wire. Close the jump ring.

What is a Byzantine pattern?

Byzantine chain is a rope-like type of chainmail that will help you create beautiful designs. For Byzantine chain, you can use jump rings in the following sizes: 14 gauge – 7.94mm (5/16 inch) or 16 gauge – 6.35mm (1/4 inch) or 18 gauge – 4.76mm (3/16 inch) or 20 gauge – 3.17mm (1/8 inch).