What does 600S162 54 mean?
What does 600S162 54 mean?
600S162-54 600 S 162 – 54. Member depth in 1/100ths inches. Thus 600 means 600/100 = 6” Flange width in 1/100ths inches. Thus 162 means 162/100 = 1.625” or 1 5/8”
What is a 600S162 43?
600S162-43 | 6″ Deep Structural C-Studs | CEMCO.
Can metal studs be used for ceiling?
Steel studs are beneficial for building ceilings because they are straight, light and can be purchased in longer lengths than wood studs. For low clearance areas, they also come in 1 5/8 inch widths. In many applications, installing a steel stud ceiling take less time and effort than it would with wood studs.
What gauge metal is 43 mil?
Thicknesses and Coatings
Steel Framing Thickness Table | ||
---|---|---|
Designation Thickness (mils) | Minimum Thickness (in) | Reference Only Gauge No |
43 | 0.0428 | 18 |
54 | 0.0538 | 16 |
68 | 0.0677 | 14 |
How do you read a stud size?
The Steel Stud Manufacturer’s Associates (SSMA) has adopted a sizing standard that moves away from ‘gauges’ and directly specifies the material thickness in mils (100ths of an inch). A 600S162-54 is a 6-inch (600) Stud (S) with a 1-5/8” flange (162) with a thickness of 0.054 in (54).
What do S U T and F stand for in standard cold formed member designations?
S = Stud or joist framing member which have lips T = Track section U = channel or stud framing section which do not have lips F = furring channels L = angle or L-header A three-digit numeral indicating flange width in 1/100 inch, followed by a dash.
How do you read a steel stud size?
What do metal studs weigh?
An 8-foot long 3-5/8-in 12 gauge metal stud can hold 8,000 lbs. The wood stud weighs about 14 pounds and the metal stud weighs 20 pounds.
How much weight can metal ceiling studs hold?
The axial load, or load weight limit, for metal studs varies widely. An 8-foot, 3-1/2-inch metal stud, for instance, may support over 2,000 pounds, while a 16-foot stud of the same width will support as little as 400 pounds.
What gauge steel is 33 mil?
20 gauge
Thicknesses range from 33 mils (20 gauge) to 97 mils (12 gauge).
Can metal studs be load bearing?
There are two main components of metal stud framing, a stud and a track. Heavier gauge metal studs are used in load bearing walls and structural applications such as exterior walls. Lighter gauge metal studs are used in non-load bearing applications such as some interior walls, half-walls, and partitions.
What size is #8 stud?
M4 0.164 inch
Terminal Stud Hole Size Reference Chart
Stud Size Terminals | ||
---|---|---|
U.S. Custom Stud Size | Metric Stud Size | Stud Diameter |
#6 | M3.5 | 0.138 inch |
#8 | M4 | 0.164 inch |
#10 | – | 0.190 inch |
How do you read a stud number?
It is a four digit identifier that translates to the width of the stud in inches. In the example provided, a stud with a 3-5/8″ web is written as 0362. 03 refers to the 3″, while 62 is the unrounded result of 5 divided by 8 (0. 625).
What are the most popular metal stud widths?
Metal Stud Sizes The most common size stud is a 3 5/8″ wide stud. Combined with a layer of 5/8″ gypsum wall board on both sides will give a 4 7/8″ thick wall.
Are metal studs load bearing?
Heavier gauge metal studs are used in load bearing walls and structural applications such as exterior walls. Lighter gauge metal studs are used in non-load bearing applications such as some interior walls, half-walls, and partitions.
Are metal studs stronger than wood?
Metal framing is stronger and has become lighter in weight. While wood framing is flammable, steel is fire resistant. Steel will not shrink, warp, split or mold. Wood is less expensive, safer to work with, faster to install, and will never rust.
What is the spacing for ceiling joists?
16 to 24 inches
Just like the studs, the standard spacing between joists is 16 to 24 inches.
Can ceiling joists support weight?
Joists (Older Home, Flat Roof & No Floor Above Garage) That gives it the strength to support your weight. Joists don’t have as much support as trusses, so you’ll often see load-bearing walls in between to help out.
Do ceiling joists carry load?
Joists—the horizontal members that span two walls and/or beams—have to carry the weight of the walls, people, furniture, appliances and other stuff we place on them.