How to reset HP printer cartridge memory?

How to reset HP printer cartridge memory?

Try these steps from HP support, Ganesh.

  1. Take the cartridges out of your printer.
  2. Kill the power to the printer by unplugging the power cord.
  3. Wait 30 seconds.
  4. Plug the cord back into the printer.
  5. When the printer requests new ink cartridges, reinstall your cartridges.

How to reset printer HP 2131?

I have a HP Desk jet 2131 printer with HP 803 cartridges….Method 2: A full reset of the printer should also do:

  1. Remove the cartridges and unplug the printer.
  2. Hold the power button on for 30+ seconds. Then release.
  3. Plug in printer and reinstall cartridges one at a time.

How to reset HP 2130 ink cartridge after refill?

Press the “On” button on your printer to turn it on, wait 20 seconds, then turn it off. Allow the printer to completely turn off. Repeat this step five times so that the HP cartridge identification information will be erased from the printer’s memory.

Why is my HP printer not working after replacing ink cartridges?

Perform a head cleaning on the printer, if available. Try resetting the ink cartridge counter. Consult your printer’s documentation to get instructions for your specific model or check the manufacturer’s website for help. Verify no software errors are occurring and try printing a test page.

How do I reset my printer after changing ink?

Reset Ink Cartridge Counter Lift the clamp securing the cartridge, but don’t remove the cartridge from the printer. Shut the clamp and press “Load/Eject” again. Consult your printer’s user manual to learn the reset process for your printer.

How do I reset my ink cartridge?

Press the button on the chip-reset tool for several seconds until the LED light on the device goes off. Then, unlock the reset tool from the cartridge. Use the resetter with other cartridges and install them back into the corresponding slots in your printer. Voila!