How do you date a Sessions mantle clock?

How do you date a Sessions mantle clock?

To date these clocks, collectors needn’t look past the label. If it was made before 1903, the label will read “E.N. Welch.” If it was made after 1903, it will say both “E.N. Welch” and “Sessions Clock Company.” The process of phasing out the Welch brand was gradual, though by 1920 the old name was practically gone.

Are clock mechanisms a standard size?

There are generally 4-6 basic sizes of movement available and your movement will generally fall into one of the sizes available between 9-31mm in length, if you movement is an odd measurement then the way round it is to simply go for the longer length shaft thats as close to your required measurement and put a spacer …

What size is the hole in a clock?

It is surprisingly simple. Just drill a 3/8″ hole in front of your clock case, slide the movement shaft through the hole and secure in place by tightening 1 hex nut.

What is spindle size in clock?

The movement with the shorter 14mm spindle is designed to go through clock faces upto 4mm thick, whereas the 23mm spindle is designed to go through clock faces 10mm to 12.5mm thick. However, the long spindle version can be used for clock face thicknesses of 4mm to 10mm thick by using a packing piece or thick washer.

Are clock mechanisms interchangeable?

Remember clock hands are not always interchangeable. It is advisable to purchase new high torque hands at the same time. If the minute hand is less than the 150mm in length you can use any of the movements listed on this website.

How old are sessions clocks?

Between 1903 and 1933 Sessions produced 52 models of mechanical clocks, ranging from Advertisers, large and small clocks with logos of various businesses, to wall, or regulator clocks, and shelf or mantel clocks, designed for the home.

What size hole do I drill for clock mechanism?

Is the Sessions Clock company still in business?

They changed its name to the Sessions Clock Company on January 9, 1903. The company would flourish for many years, but went into decline after World War II. The company was sold in the 1950s and eventually liquidated.

Where are sessions clocks made?

Welch Company, a clock manufacturer located in Forestville, Connecticut.

What clocks are worth money?

The most coveted antique clocks are those from the 17th, 18th and early 19th centuries that have their original components still intact. Clocks made by E. Howard & Co., Durfee & Enches, Waltham Clock Company and Simon Willard are some of the most popular with antique buyers.

When did Seth Thomas stop making clocks?

In January of 2009 The Seth Thomas company closed and is no longer in operations. No parts or specific information is available to us to share. If you need parts for a Seth Thomas Clock, try Timesavers.com as they have many generic clock parts that might work for you.

How do you date a Seth Thomas Clock?

Many Seth Thomas clocks from 1881 to 1918 have a date code stamped in ink on the case back or bottom. Usually, the year is done in reverse, followed by a letter A–L representing the month. For example, April 1897 would appear as 7981 D.