How do I fix DStv extra view?
How do I fix DStv extra view?
THE FIX FOR ERROR E143-4
- Re check cable from the primary decoder – Check / try restarting your decoder.
- Check extra view port settings in the decoder settings.
- Check if heart beat is being received in the primary decoder settings.
- check and see if the pairing of the decoders is the same, to work on triple and extra view.
How do I check my Xtraview status?
How to complete the within-the-decoder Xtraview setup
- Firstly, switch off all the decoders, then start with the primary and set the user band.
- Secondly, check the Xtraview status of all the decoders by going to the “Extraview status” option right at the bottom of the “general information” drop-down menu.
How do I reset my extra view decoder?
Press the blue “DStv button” on your remote control. Then use the right arrow on the remote control to go to “Settings“. Use the down arrow to go to “System Settings“. Scroll down using the down arrow to select “Reset To Factory Default” then press “OK” on your remote control.
Why is my secondary decoder showing no signal?
Why your DStv says no signal? The reason your DStv says no signal is because there is an error in the DStv installation. This is caused by either a misaligned satellite dish, a faulty LNB, an improperly connected F-connector plug, loose cables or incorrect decoder settings on the LNB type.
How do I check my heartbeat on Xtraview?
Click on the menu button on your remote and navigate to the extra view option. Select it, and it will bring you a list of all connected decoders in the setup. You can now select the individual decoder you want to test. Once you click on it, you will get all the signal information about it.
How do I activate extra view?
On your remote, click the “Help” button and scroll to the “General Information” option. Click on it and select the “Extra View” option. If your connection is correct and activated, it will be displayed here. This is the simple answer to how do I activate DStv extra view.
Where is Xtraview settings on decoder?
To check the status from the xtraview settings menu, first, click on the help option. It will bring up a menu, and you can click on the general information option. Among the options available here is the extra view status check, and you can click on it. It will show the status of all your connected decoders.
How do I activate XtraView?
How does smart LNB connect to extra view?
Using a coaxial cable, connect all decoders and run them to the smart LNB. If the decoders in your extra view connection are new models, use the uni-cable port to connect to the smart LNB. Once connected, both decoders will begin receiving a signal, and you can proceed to the installation wizard.
What is DStv heartbeat?
A heartbeat is a signal sent from one decoder to the rest when you make an xtraview connection. It is transmitted every 30 seconds and helps to ensure all the decoders are getting a strong signal.
How do I activate Xtraview?
How do I link DStv decoders to Xtraview?
First, connect the coaxial cable of each decoder to the smart LNB. If you have recent or newer decoder models then use the uni-cable ports on the smart LNB. Otherwise, if you have old decoder models then you can use the universal port. Remember Explora decoders use the uni-cable ports.
How long does an LNB last?
As someone who talks to a lot of DIRECTV and DISH installers, I can assure you that LNBs break all the time. The good news is that they usually break immediately, or they break after about 3-4 years. Despite the best quality control steps, some LNBs are no good when they get to the customer site.
How does DStv dual view work?
Indeed, dual view works by linking one dual view decoder to others and transferring a signal to them. When other decoders are connected, they will be using a similar subscription. The channels available will be similar on all of them. The main dual view DStv decoder is called the primary decoder.