Does the height of a refrigerator include the hinges?

Does the height of a refrigerator include the hinges?

Measure the New Refrigerator To measure the height, extend the tape measure from the floor to the top of the door hinges. (Most listed dimensions don’t include the hinges, which can add another inch to the overall height.)

How tall should a refrigerator opening be?

The standard dimensions for a full-width door fridge are: 23 to 36 inches wide and 65 to 69 inches tall.

Are all counter-depth refrigerators the same height?

Most counter-depth refrigerators are 30 to 36 inches wide and 66 to 72 inches tall, but there are some fridges, like undercounter refrigerators and built-in models, that fall outside those ranges.

How far does a counter-depth fridge stick out?

A counter-depth refrigerator is designed to offer similar storage capacity as a regular, full-size refrigerator in a style that generally doesn’t stick out more than an inch or two past your kitchen counters and cabinets. Counter-depth refrigerators are typically under 30 inches deep.

What is the standard cabinet opening for a refrigerator?

The refrigerator opening must have minimum dimensions of 70″ high x 36-1/8″ wide x 24-1/2″ deep as shown at right. If there is an overhead cabinet, allow 1″ for cabinet door clearance with the top trim piece so the cabinet doors can be opened without hitting the top trim.

Are refrigerator Heights standard?

Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.

Do you lose space with a counter-depth refrigerator?

By shaving off a few inches, counter depth refrigerators offer a shallower build than their standard depth counterparts. However, the disadvantage to this is that you lose some interior space and will have less storage capacity for food items.

Is it OK for refrigerator to stick out?

Standard refrigerators are typically 32 to 36 inches deep or more, and since countertops are normally about 25 inches deep (24 inches for the base cabinet with a 1-inch overhang) this means that a standard refrigerator will stick out from adjoining countertops by 6 inches or more.

What is the rough opening for a 36 inch refrigerator?

1-9 of 9 Answers. The unit is 35 and 3/4 inches wide. If you’re installing next to a wall, you’ll need a minimum clearance of 3 and 3/4 inches for the door.

How are refrigerator heights measured?

Measure the height of the space from the floor to the lowest point on the upper cabinet. Make this measurement twice, first at the front of the space and then at the back of the space. These two measurements should be equal, but if they are not, work with the shorter of the two measurements.

What is the height of a refrigerator cabinet?

66 to 70 inches tall
Standard refrigerator height ranges from 66 to 70 inches tall, with French Door and side-by-side models measuring on the taller ends. Counter-depth refrigerators will also likely measure a few inches taller than standard refrigerators.

Can you adjust height of refrigerator?

For refrigerators with height-adjustable rollers, look for an adjustment screw near the top of the roller. It varies by model, but in most cases, using a screwdriver to tighten the screw (clockwise) will raise the front of the refrigerator and loosening (counter-clockwise) will lower it.

Why is counter depth refrigerators more expensive?

Manufacturers make fewer counter-depth products compared to standard depth fridges which affects unit-level cost. In addition, manufacturers often use more costly, but thinner insulation material to provide as much interior space as possible; also contributing to their higher cost.

How do you measure a counter-depth refrigerator?

Typically, the overall depth when measured from back of the appliance to the front of the handles is about 30 inches. However, the depth of the refrigerator box itself—measured without the doors—is often about 24 to 25 inches, which does match the depth of standard cabinetry and countertops.

Will 36 fridge fit in a 36 opening?

Yes, it should. Mine measures 35.75″ wide.

What is a hidden hinge refrigerator?

A hidden hinge, also known as a concealed door hinge, is a hinge that can’t be seen when viewing the door from the front and/or side. If you have seen European-style hinges, you have seen concealed hinges. They are designed to create an aesthetic look, one that is seamless and can be made to match cabinetry, if needed.