Where are Myerchin knives made?

Where are Myerchin knives made?

Most of their blades are made in Japan and China by professionals with about 20 years of experience. Each of their tools stands out as employees at Myerchin spend years in the design and prototype stages of production.

What is a Riggers knife used for?

The rigging knife is used to cut large ropes. You can drive the knife into the rope to sever it. This type of knife is often called a rescue knife and is considered an essential part of emergency gear. The handles of the rescue knife are easy to grip when your hands are cold and wet or you are wearing gloves.

What is the spike for on a sailors knife?

The blade is a sure-handed rope cutter, and the spike is made for working with knots and splicing rope. In fact, there is a knot dubbed the marlinespike hitch that serves as a temporary knot for various needs.

What was a marlin spike used for?

Note: Marlinspike is a nautical term that refers to a sharp, six to 12 inch metal pin, usually made of iron or steel, that’s used to splice rope, untie knots, or form toggles or handles. Skippers, mates and deckhands that become proficient with the marlinspike can be referred to as Marlin Spikes or Marlin Spike Seamen.

What is a bosun’s knife?

The Bosun is the original rigging knife created by Captain Charles Currey (CBE, RN) in 1946, just after he returned home from World War II. It was the first knife of its kind to be constructed of all stainless steel with a locking marlinspike and a slotted handle for opening shackles.

What is the difference between a fid and a marlin spike?

A fid is a conical tool traditionally made of wood or bone. It is used to work with rope and canvas in marlinespike seamanship. A fid differs from a marlinspike in material and purposes. A marlinspike is used in working with wire rope, natural and synthetic lines, may be used to open shackles, and is made of metal.

What is a marlinspike on a ship?

Marlinspike Seamanship. ∎ Marlinespike is the art of. seamanship that includes. the tying of various knots, splicing, working with cable or wire rope with cable or wire rope, even making decorative ornaments from rope or line.

What is marlin spike used for?

What is a Swedish fid?

These are stainless steel Swedish fids. They are used primarily for separating the strands of three strand rope in order to make a splice. Even though it is a pretty basic tool, they are invaluable for doing three strand splices.

What size fid do I need?

You can find the appropriate fid length by taking the rope diameter and multiplying it by twenty-one (21). The fid diameter is three-quarters (3/4) of the rope’s diameter. Finally, the short fid mark is made at three-quarters (3/4) of the fid’s overall length from the pointed tip.

What is the king of all knots?

The bowline is sometimes referred to as King of the knots because of its importance. Along with the sheet bend and the clove hitch, the bowline is often considered one of the most essential knots. While widely considered a reliable knot, when tied in certain materials or loading conditions it may not hold.

What is marlin spike in the Navy?

The marlinspike may be a separate tool or one item on a pocket knife. Sailors who become proficient at knot tying, splicing, and sewing using the marlinspike are said to have mastered marlinespike seamanship, earning them the right to be known as marlin spikes or marlinspike seamen.

What is marlinspike in the Navy?

Sailors who become proficient at knot tying, splicing, and sewing using the marlinspike are said to have mastered marlinespike seamanship, earning them the right to be known as marlin spikes or marlinspike seamen.

What is a seax knife good for?

The seax was mainly used for hunting and fighting. The blade was long and heavy enough to be larger than a traditional dagger but small enough to still be wielded with one hand. Most Viking warriors probably carried a seax in addition to their other weapons.

What is a sheepsfoot knife good for?

Sheepsfoot Blade Sheepsfoot blades are designed for slicing while minimizing the potential for accidental piercing with the point. It was originally used to trim the hooves of sheep but comes in handy as a rescue tool today.

Who was Wharncliffe?

Lord Wharncliffe was the patron of Joseph Rodgers & Son — Cutlers to Their Majesties and one of the most important figures in the famed Sheffield cutlery industry — and so he presented the pattern to him. The blade was created and called the Wharncliffe blade after the Lord himself a few years later.